Used gaylord boxes / Metro DetroitListed by footprint, height, walls, bottom, grade
Detroit Used Gaylords

Catalogue / Octagon (46 x 38 in inside)

46 x 38 x 36 in octabin gaylord boxes

The 46 x 38 x 36 in octagon is an eight-sided bulk bin. One distributor lists it as a triple-wall bin with 1300 lb in its name, a listed capacity of 2,200 lb and a weight of 29 lb, and recommends it for resins, powders and produce. 1300 lb is a product name, and the stamp on the box is the only rating.

Footprint
Octagon, 46 x 38 in inside
Inside height
36 in
Volume
Eight-sided, see below
Listed by one distributor
1300 lb in the product name

What this size is

This is the octabin entry. The angled corners resist bulging, which matters for loads that flow: pellets, regrind, powders, and melons and squash by the hundred. It sits on the 48 x 40 in pallet and holds 46 x 38 in inside.

Two distributors give two weights for what is nominally the same size: 29 lb for one and about 22.9 lb for an octagon-bottom triple wall listed as 1300#/ECT-155 for another. The spread is why the construction should be checked against the box in hand, and why the stamp is the thing to read.

Plan view: 46 x 38 x 36 in octagon against a 48 x 40 pallet46 x 38 in box48 x 40 in pallet (dashed)
Plan view: the 46 x 38 in footprint against a 48 x 40 in pallet.

The numbers

46 x 38 x 36 in octagon: figures and how they are worked
FieldValueHow it is worked
Footprint46 x 38 in insideLength by width, matched to a pallet
Inside height36 inFloor of the box to the top of the walls
Volumesee noteAn eight-sided box has less volume than the 46 x 38 x 36 in rectangle around it, so we do not compute one. Ask for the maker's figure for the box in question.
Listed by one distributor1,300 lbPart of the product name; the stamp is the only rating
Wall counts cited at this height2-wall, 3-wall, 4-wall, 5-wallHeights makers cite: 2-wall 30 to 36, 3-wall 34 to 40, 4-wall 36 to 41, 5-wall 36 to 46 in

What it is used for

  • Resin, pellets and regrind.
  • Powders in a lined box.
  • Watermelon, cantaloupe and squash at harvest.
  • Any flowable load that would bulge a rectangular wall.

Octabins are normally five-wall or heavy triple wall, and the bottom is usually partial with a slip sheet. Ask for a liner if the load is a powder.

How many fit on a 53-foot trailer

Computed, not promised. For the 46 x 38 x 36 in octagon box we use round working numbers for the trailer floor: 636 in long, 100 in wide and 108 in high inside, and a 6 in pallet under each box, which makes each layer 42 in tall. Check your carrier's trailer, since inside dimensions vary.

46 x 38 x 36 in octagon on that floor
StepResult
Best orientation16 rows of 2 across
Boxes on the floor16 x 2 = 32
Height per layer36 + 6 = 42 in
Layers that fit2 (108 / 42, rounded down)
If every layer is allowed64

Stacking is limited by the box rating, the weight of the load and your carrier's rules, so the last line is a ceiling, not a plan. The trailer guide works the other sizes the same way.

Questions

How is the octabin different from a normal gaylord?
It has an eight-sided wall layout. The angled corners resist bulging under dense, flowable loads.
Can it carry 2,200 lb?
That is one distributor's listed capacity for a new triple-wall octagon. A used one carries what its stamp and condition allow, so check both.

Request 46 x 38 x 36 in octagon

Send the spec and how many. Step one takes a minute.

Request by spec →
Request by spec →